[SELL] Frankendeck Project Decks - V2 and V3
Posted: Mon May 22, 2023 3:16 pm
Hi,
A year or so ago I produced a limited run of 54 Frankendecks with a leatherette sleeve made to evoke Frankenstein’s monster.
These gained a lot of interest and sold out, so much so that I decided to produce a second (and now third) version modelled after Victor Frankenstein and his fiancé, Elizabeth.
While the V1 was stitched sleeve slipped over a random tuck from the decks used to create the Frankendecks, the V2 and V3 outer elements are made by hand, included the inner tucks (or tray, in the case of the V2).
While I have had amazing continued support from many of the original purchasers who got a V1 deck, the V2 and V3 have not had the same volume of interest.
So, I thought I’d try posting here for a bit more exposure alongside Facebook and to reach anyone who doesn’t frequent Facebook!
I am UK based, however I am arranging a bulk US shipment via a trusted member of the community, Craig Satori.
This worked well for the V1, so I am doing the same with the V2 and V3.
This way, the international shipping cost can be split and everyone can benefit from a reduced rate.
From lessons learned with the V2 (which I planned to ship much sooner to the US, but had delays due to lack of momentum, and as such I am now shipping V2/V3 as pairs with matching edition numbers) I am not taking any payments from US folk until I have got the bulk shipment ready to send.
At this stage, think of these as reservations with no strings attached. No commitment to purchase until I’m ready to ship.
If anyone who read this has dealt with me regarding any of the project, please drop a line here to vouch if possible!
I am keen to get these decks out to people ASAP, so let me know if you are interested
Cost is £60 GBP for a matching numbered pair of decks.
Will ship anywhere at buyer’s cost, quote to be obtained during discussions.
Thanks for your time and consideration!
A year or so ago I produced a limited run of 54 Frankendecks with a leatherette sleeve made to evoke Frankenstein’s monster.
These gained a lot of interest and sold out, so much so that I decided to produce a second (and now third) version modelled after Victor Frankenstein and his fiancé, Elizabeth.
While the V1 was stitched sleeve slipped over a random tuck from the decks used to create the Frankendecks, the V2 and V3 outer elements are made by hand, included the inner tucks (or tray, in the case of the V2).
While I have had amazing continued support from many of the original purchasers who got a V1 deck, the V2 and V3 have not had the same volume of interest.
So, I thought I’d try posting here for a bit more exposure alongside Facebook and to reach anyone who doesn’t frequent Facebook!
I am UK based, however I am arranging a bulk US shipment via a trusted member of the community, Craig Satori.
This worked well for the V1, so I am doing the same with the V2 and V3.
This way, the international shipping cost can be split and everyone can benefit from a reduced rate.
From lessons learned with the V2 (which I planned to ship much sooner to the US, but had delays due to lack of momentum, and as such I am now shipping V2/V3 as pairs with matching edition numbers) I am not taking any payments from US folk until I have got the bulk shipment ready to send.
At this stage, think of these as reservations with no strings attached. No commitment to purchase until I’m ready to ship.
If anyone who read this has dealt with me regarding any of the project, please drop a line here to vouch if possible!
I am keen to get these decks out to people ASAP, so let me know if you are interested
Cost is £60 GBP for a matching numbered pair of decks.
Will ship anywhere at buyer’s cost, quote to be obtained during discussions.
Thanks for your time and consideration!