Frozen Metal & The Cube

[VXD]

Screen Shot 2019-10-28 at 00.58.00.png (699.8 KiB) Viewed 5319 times

Ain''t nothing cooler than an ice cube...

EDIT: Haha, I thought I had posted the pics here and in fact I had deleted the only one, when trying to post the others. Anyway, are the images of our 'Frozen Metal' deck and The Cube (as display). Som may have been aware that we had something else we were going to launch and then decided against it in the main campaign. It's different to anything we've done before, so decided it should be launched as a stand-alone.

And yes....we are going to send one to Ice Cube, of course

[Justin O.]

You guys need to chill out

[VXD]

Touche

[VXD]

Thread updated (with something to actual see now ....

Features:

Pic 1 - Card Back of the Ice Blue deck but featuring 'Frost' holographic foil instead of our normal transparent holo foil
Pic 2 - Soild Acrylic cube with a slot in the back to slide the metal case into
Pic 3 - Lasering all over the top and bottom of the metal case as shown to give a cracked look to the Ice Blue Metal deck

[hsbc]

Okay the ice cube display is really cool Do you have a picture of the back?

[gacktvam]

When will this KS launch?

[theCapraAegagrus]

[VXD]

We're still gathering the cost info re the injection moulds for the ice cube and once we have that we can set a goal for it and get the KS page started. Still have some work to do, despite this having been conceived and designed about 2-3 months ago.

Probable KS dates will be 5th Nov - 5th Dec.

Excited to deliver something different...something that will surely stand out in a playing cards display. The 'frost' (it's actual name by KURZ Foils) holographic foil is really nice too...I'll try get a video of it and post that somewhere viewable, so people can get a proper impression...it's really cool (sorry ).

[theCapraAegagrus]

We're still gathering the cost info re the injection moulds for the ice cube and once we have that we can set a goal for it and get the KS page started. Still have some work to do, despite this having been conceived and designed about 2-3 months ago.

Probable KS dates will be 5th Nov - 5th Dec.

Excited to deliver something different...something that will surely stand out in a playing cards display. The 'frost' (it's actual name by KURZ Foils) holographic foil is really nice too...I'll try get a video of it and post that somewhere viewable, so people can get a proper impression...it's really cool (sorry ).

How does this display work? Is the 'ice' open on the back end to put the deck in? Is it a TwoPiece design that completely surrounds the deck? I might go in on this one.

[BaconWise]

Is it a TwoPiece design that completely surrounds the deck? I might go in on this one.

Now why would you be interested in a TwoPiece design?

[Mike2350]

That is sweet. I just had my Vegas Diffractor decks out this morning. One just can't get tired of seeing those cards. At least for me. I guess I shouldn't speak for everyone, lol. So with your metal case manufacturer all sorted out, what can we expect as far as a timeline? I think this might end up being the centerpiece of my display. The ice cube is just too cool not to be.

[VXD]

A better look at the 'Frost' foil by Kurz here (for anyone that doesn't know, Kurz are the world leaders in quality of hot foils):

https://youtu.be/acCajvNlkVc" onclick="window.open(this.href);return false;

Re The Cube and whether it will be OnePiece or TwoPiece ( ), we think we are going with OnePiece for 2 reasons:

1) Cost of moulds - More moulds = higher production cost (each injection mould can be $4-6K, dependant on factors)
2) If we went with 2 parts, then a join would be visible on the 2 sides. A slot at the back (not much larger than the thickness of the metal case is a better solution, we think, as there are then 3 faces of the ice cube that are not interrupted in any way and the 'display' works better. Open to further thoughts & opinions though on this and we're still discussing the options with the factory.

Re delivery - looking currently at delivery at the same time as the London Diffractor (April).

[theCapraAegagrus]

A better look at the 'Frost' foil by Kurz here (for anyone that doesn't know, Kurz are the world leaders in quality of hot foils):

_

Re The Cube and whether it will be OnePiece or TwoPiece ( ), we think we are going with OnePiece for 2 reasons:

1) Cost of moulds - More moulds = higher production cost (each injection mould can be $4-6K, dependant on factors)
2) If we went with 2 parts, then a join would be visible on the 2 sides. A slot at the back (not much larger than the thickness of the metal case is a better solution, we think, as there are then 3 faces of the ice cube that are not interrupted in any way and the 'display' works better. Open to further thoughts & opinions though on this and we're still discussing the options with the factory.

Re delivery - looking currently at delivery at the same time as the London Diffractor (April).

I am very interested.

[STLBluesNut]

That foil is very nice!

Sent from my S10+ using Tapatalk

[double_left]

Probable KS dates will be 5th Nov - 5th Dec.

Was this not supposed to launch today and if not, what happened?
Kat

[Bradius]

I think it was it might launch sometime in the next month. Nothing definite.

[Decknowledgy]

Just got a notification that this will be launching tomorrow (12th NOV) AT 5PM EST / 11PM CET, link here: https://www.kickstarter.com/projects/13 ... d-the-cube

But for some reason the operating account on KS is no longer under "VXD Felipe Diz" in New York but "Diffractor Playing Cards" in Karlsruhe, Germany.

Original: https://www.kickstarter.com/profile/zeedog/about
Now: https://www.kickstarter.com/profile/1366593885/about

Also, account "VXD" doesn't exist on UC anymore... Guess Andrew is out.

[Bradius]

I checked the link for the preliminary site, but it doesn't give any information on the cost or tiers. I kinda went all out for the last project, so not sure I can be in for this one with all of my Convention and post convention purchases. It does look cool, so hope I can be in. New account is "VXD2".

[theCapraAegagrus]

...Also, account "VXD" doesn't exist on UC anymore... Guess Andrew is out.

[PrincessTrouble]

Think Andrew is taking a break. He posted this from the VXD2 account in the Las Vegas thread:

My sincere apologies (to Roope and Thedissident + others). That was uncalled for and childish. Deactivated that account - time for a timeout and reflection. It has been a stressful time, but there is no excuse for random vibes, at anyone. Apologies.

[hsbc]

Yeah, he posted again with a new account but since new accounts' posts have to be manually approved it showed up late and I think went by largely unnoticed

[PrincessTrouble]

Yeah, he posted again with a new account but since new accounts' posts have to be manually approved it showed up late and I think went by largely unnoticed

He's only posted the 1 time with the VXD2 account.

[Decknowledgy]

It's live

[theCapraAegagrus]

Damn. Early bird seems like a good deal.

[macstrat]

Is there going to be an option for just the deck? $99 is too steep for me

[Bradius]

You can keep checking, but I doubt it. I feel your pain. I just missed the single EB tier myself.

[Strag]

I don't know exactly why,but I've yet to purchase a diffractor deck. Price is certainly part of it but also some of the comments from VXD account rubbed me the wrong way. I'll continue to wait on the sidelines.

Sent from my moto g(7) power using Tapatalk

[Harvonsgard]

I don't know exactly why,but I've yet to purchase a diffractor deck. Price is certainly part of it but also some of the comments from VXD account rubbed me the wrong way. I'll continue to wait on the sidelines.

I have the Violet Vegas Diffractor and I like the novelty, but the overall quality is a bit subpar, at least to me. Magik mentioned it before, the cut of the cards is uneven; some cards are slightly bigger than others and the Diffractor effect is highly dependable on the light surroundings. Don't get me wrong, I do understand that the R&D is a huge chunk of the price, but for what they cost, I prefer to get an Lotrék deck.

The strange comments are as well something that leaves me very puzzled. But I have to point out that during the pre-order and fullfillment for my aforementiond deck, I never encountered something else than politeness and professionalism from Andrew in the email exchange and was very pleased with the customer service.

[Adonael]

Is there going to be an option for just the deck? $99 is too steep for me

I was thinking the opposite, (if I had the money) is there a way to get the cube without the deck? An Arabesque Silver would look like a jewel in one of these lol.

[Bradius]

That actually sounds like a great way to display an Arabesque Silver Collector deck. Keep in mind the space is designed for a Vertex Metal Case, so it will be larger than a standard deck. Even so, I think a standard deck would probably look great inside it as well.