Bicycle UnitedCardists Deck

[Evan]

Do you think you could make the borders a little bit thinner?

[DaMan]

Check out the Gaff Card:

This!
I am very excited that a possible V2 would have this for all face cards. I love the way everything has a lot of depth.
Very attractive artwork.
I keep looking at it as I type this and it gets better and better. Those greens are amazing.

[RandyButterfield]

Do you think you could make the borders a little bit thinner?

I think you guys keep asking for thinner borders because what you're seeing is such a large JPG, and the white border looks wide at that scale.

Printed at actual size, the border on the UC Back is at .125" (1/8") — thinner if you account for the outer glow. It's thinner than the BC Luxury border and the same size as the ORNATE border. I'm looking at a printout right now and it's pretty thin! When comparing it to other Decks like the Arch Angels, Griffin, Sultan Republic and Pedale borders, the UC border is much thinner. I would say it's pretty close in thinness to Tendril, Call of Cthulhu and of course ORNATES. It looks to be only about 1/32" thicker than the Aurum border.

As someone who's been in the printing industry for a very long time, I would feel very uncomfortable making it any thinner than 1/8". Any thinner than that would make the diecutters' job a living hell!

I'm attaching a smaller JPG with a lineup of the other Backs I've designed for comparison.

thanks, Randy

[lumpyliew]

Do you think you could make the borders a little bit thinner?

I think you guys keep asking for thinner borders because what you're seeing is such a large JPG, and the white border looks wide at that scale.

Printed at actual size, the border on the UC Back is at .125" (1/8") — thinner if you account for the outer glow. It's thinner than the BC Luxury border and the same size as the ORNATE border. I'm looking at a printout right now and it's pretty thin! When comparing it to other Decks like the Arch Angels, Griffin, Sultan Republic and Pedale borders, the UC border is much thinner. I would say it's pretty close in thinness to Tendril, Call of Cthulhu and of course ORNATES. It looks to be only about 1/32" thicker than the Aurum border.

As someone who's been in the printing industry for a very long time, I would feel very uncomfortable making it any thinner than 1/8". Any thinner than that would make the diecutters' job a living hell!

I'm attaching a smaller JPG with a lineup of the other Backs I've designed for comparison.

thanks, Randy

Oh yeah! Randy is one of my favourite designer! Ornates - bright colours , thin borders . UC deck - bright colours , thin borders!

[sinjin7]

One thing I really liked was the D&D Smoke reprint where the inside of the tuck box was lined in silver foil. How sick would it be if the inside of the UC tuck box was lined with green foil!

This is an idea that I actually like a lot. Given my aversion to anyting D&D, I didn't purchase their ridiculous boxed reprint set. However, when they made the individual v.1-v.6 reprints individually available, I bought the Smoke reprint specifically to check out the foil lined tuck box and I have to admit I was impressed by that feature.

If the UC deck's borders are as thin as the Ornate deck's borders, then it will definitely be thin enough to satisfy most cardists, so I'm happy to hear that. I'm really looking forward to the UC deck becoming a reality!

[dancards]

I played a little bit with the design to show some ideas, the first design in the top left corner is the original.

In the first row I changed the green border, a little bit darker and without that glow effect, then I removed some elements until it stayed only with the logo in the center to see how a simpler version would look. I liked the 3 last designs better than the first 2, less is more?

In the second row I added the logo in the corners to give a better effect for fans, something more elaborated than the UC logo would look better but it is just an idea.

In the 3rd row I used the UC logo and played with some patterns.

[Strag]

Row 1, Column 5 for me.

[MagikFingerz]

I still prefer the original, but it was interesting to see variations.

[volantangel]

I still prefer the original, but it was interesting to see variations.

I concur

[Sharpie]

Row 1, Column 5 for me.

Yes, that one is nice and clean.
Might need a little something around the edges.

I also like Row 1, Column 3.

[BMPokerworld]

The back design isn't changing any further. It has already been decided on.

Thanks!

[cosmicsecret]

What would be a easy but great addition : One way pips like on the Bicycle Professional / Skull & Bones and i read that the Legends deck had those too.
The difference is that one side of the pips and value is thin font and the other one in bold font.
Very easy to spot a turned card.
This is a strong but simple feature that could be added very easily without any great effort

[MagikFingerz]

What would be a easy but great addition : One way pips like on the Bicycle Professional / Skull & Bones and i read that the Legends deck had those too.
The difference is that one side of the pips and value is thin font and the other one in bold font.
Very easy to spot a turned card.
This is a strong but simple feature that could be added very easily without any great effort

Wouldn't that make face-up fans messy once the cards are mixed?

[BMPokerworld]

Check out the jokers. They are slightly different. One is a gaff. One is lights on and the other is lights off.



Thanks!

[Oswin]

No border !?

[volantangel]

Pardon me, but what are the jokers supposed to be? I cant seem to make out what its supposed to be..

And having no borders would make the jokers stick out like a sore thumb on a bordered deck, wouldnt be very applicable even in normal games that requires jokers

[cosmicsecret]

What would be a easy but great addition : One way pips like on the Bicycle Professional / Skull & Bones and i read that the Legends deck had those too.
The difference is that one side of the pips and value is thin font and the other one in bold font.
Very easy to spot a turned card.
This is a strong but simple feature that could be added very easily without any great effort

Wouldn't that make face-up fans messy once the cards are mixed?

Not at all! If you do not know that this feature is on the pips/values you do not notice it. Its subtle..very subtle

Thumbfan - compare the red 2 with the other cards to see the difference

IMG_20130313_131709.jpg (837.69 KiB) Viewed 1456 times

[RandyButterfield]

Pardon me, but what are the jokers supposed to be? I cant seem to make out what its supposed to be..

And having no borders would make the jokers stick out like a sore thumb on a bordered deck, wouldnt be very applicable even in normal games that requires jokers

I didn't think it was too abstract to spot that they were computer mice with a Jester's hat! It seems pretty clear to me.

As for not having borders. I figured the cardists would just leave the Jokers in the Tuck box and the Magicians would figure out a way to use it with the ON/OFF light Gaff aspect. As for card games that requires Jokers. Does anyone on the Forums actually play any card games that use the Joker cards?!! I guess I play too much Poker, because I'm used to leaving the Jokers with the Gaff cards in the Tuck box whenever a card game get's going. I could add a small white border, but it would definitely take away from the illusion that the mouse cord is wrapping in and out of the outer area.

thanks, Randy

[volantangel]

Pardon me, but what are the jokers supposed to be? I cant seem to make out what its supposed to be..

And having no borders would make the jokers stick out like a sore thumb on a bordered deck, wouldnt be very applicable even in normal games that requires jokers

I didn't think it was too abstract to spot that they were computer mice with a Jester's hat! It seems pretty clear to me.

As for not having borders. I figured the cardists would just leave the Jokers in the Tuck box and the Magicians would figure out a way to use it with the ON/OFF light Gaff aspect. As for card games that requires Jokers. Does anyone on the Forums actually play any card games that use the Joker cards?!! I guess I play too much Poker, because I'm used to leaving the Jokers with the Gaff cards in the Tuck box whenever a card game get's going. I could add a small white border, but it would definitely take away from the illusion that the mouse cord is wrapping in and out of the outer area.

thanks, Randy

Haha now that you say it it makes more sense, but probably my mouse doesnt look like that lol..

There are still a few simple games that require jokers i guess, but nothing serious i guess, but yes its going to take away from the cord illusion, soooo lets see what the rest say

[DukeBoy]

cant the cord just go through the white boarder too?

[RandyButterfield]

Added a white border. The cords look awful overlapping the border, so it's either this way or without the border.

thanks, Randy

[Russell]

No border.

The joker can look different, keep your original design.

[JokerzGamez]

Borders on the Jokers would be more convenient for magic, specifically sandwich routines. Whether the Jokers gaff would be obvious enough to use or not, Im not sure. I guess I would have to actually see them in my hands. You could try encorporating a reveal into the Jokers, maybe sticking with the light thing in someway

[MagikFingerz]

What would be a easy but great addition : One way pips like on the Bicycle Professional / Skull & Bones and i read that the Legends deck had those too.
The difference is that one side of the pips and value is thin font and the other one in bold font.
Very easy to spot a turned card.
This is a strong but simple feature that could be added very easily without any great effort

Wouldn't that make face-up fans messy once the cards are mixed?

Not at all! If you do not know that this feature is on the pips/values you do not notice it. Its subtle..very subtle

Yeah, that would bother me

[UtterFool]

I play games that require the Joker.
The one I play most often though is Hand and Foot, which requires at least 7 decks, so I never use designer decks for that game.
In fact the only game I use designer decks for is Poker.

I like the look of the Joker, but the lack of border when the other cards have borders would probably kill my OCD.

Nonetheless Paul they look great.

[cosmicsecret]

What would be a easy but great addition : One way pips like on the Bicycle Professional / Skull & Bones and i read that the Legends deck had those too.
The difference is that one side of the pips and value is thin font and the other one in bold font.
Very easy to spot a turned card.
This is a strong but simple feature that could be added very easily without any great effort

Wouldn't that make face-up fans messy once the cards are mixed?

Not at all! If you do not know that this feature is on the pips/values you do not notice it. Its subtle..very subtle

Yeah, that would bother me

[BMPokerworld]

Here's a picture of the jokers with a border. Let me know if you like the border or borderless jokers better.



Thanks!

[elcyciB]

Borderless, how the designer had it to begin with. I say keep with his vision. Everything has looked great so far

[cosmicsecret]

As a magician i have to say - go with the borders , on the other side i would not use those jokers in magic.
The "gaff" is neat and i´m sure someone will use it but i prefer 2 identical jokers.
Never used a card reveal build in a joker to reveal a selected card.

As a cardist , i could care less about a joker

[Magic_Orthodoxy]

what if the cable faded to white and the line was "missing" from that tiny section where the cable hits it?